Selecting the Right Size Snowboard

So you’re looking to start shredding the slopes with a brand new snowboard, but you’re not sure what size snowboard you actually need?  Look no further.  Right here you’ll find a sizing guide that’ll help riders of all experience levels and riding styles.

Before discussing any specifics we should point out that snowboard size is 100% about rider preference.  Snowboard size in relation to a person’s height and weight are in no way set in stone but can be used as a rough guide.  No two people ride in the same way and everyone uses different riding styles and techniques when thrashing the mountain.

That being said, we can offer some general sizing recommendations and give you a starting point before you make a snowboard purchase.  Review these sizing charts and see where you roughly fit into the mix in regard to snowboard length (we’ll discuss width later on):

Boarder’s Weight Snowboard Length
110-120 lbs. 128-136 cm
115-130 lbs. 133-141 cm
125-135 lbs. 139-147 cm
135-145 lbs. 144-152 cm
140-155 lbs. 149-157 cm
150-165 lbs. 154-162 cm
160-175 lbs. 159-167 cm
170-185 lbs. 160-168+ cm
180-195 lbs. 165+ cm
190-205+ lbs. 165+ cm
Boarder’s Height Snowboard Length
4’10″ 125-140 cm
5’0″ 130-142 cm
5’2″ 135-145 cm
5’4″ 140-148 cm
5’6″ 145-152 cm
5’8″ 147-155 cm
5’10″ 154-163 cm
6’0″ 157-165 cm
6’1″ 160-168 cm
6’2″+ 160+ cm

STEP 1: DETERMINE YOUR HEIGHT & WEIGHT: The rider’s weight is typically the most important factor when choosing a size for your snowboard.  Heavier riders will want to choose longer boards because they offer more surface area than a shorter board.  Greater surface area will allow heavier snowboarders to ‘float’ on the surface of the snow rather than sink into the powder.  This in turn provides greater stability for the snowboarder.  Lighter riders are able to opt for shorter boards because they won’t sink into the snow as easily.

blog snow size img 173x300 Selecting the Right Size SnowboardIf you fall between weight classes you can then factor in your height to estimate the appropriate snowboard size.  As a general rule your snowboard should come up to about your chin or nose level when standing on its end next to you (see image at left).

Check out the charts again and see where you measure up.

STEP 2: DETERMINE YOUR EXPERIENCE LEVEL: Now that we’ve determined a general starting point, let’s consider your experience level.  Are you a newb or are you an experienced snowboarder?  If you’re relatively new to the slopes, then you likely haven’t totally settled into any particular riding style just yet.

If this is the case then you might want to opt for a slightly shorter length for your snowboard.  A shorter snowboard will offer more maneuverability and slightly slower speeds as you’re cruising down the mountain.  This means you’ll have a lot better control and a much better chance at avoiding gnarly wipeouts with your follow boarders and skiers.

STEP 3: DETERMINE YOUR RIDING STYLE: If you’re an advanced snowboarder than you’ve probably settled into a riding style and might want to consider a few more options.  The most common riding styles are freeride and freestyle so we’ll consider those for the sake of this article.

If you’re a freeride, or all-mountain, boarder you might want to consider a longer length snowboard. The longer length will provide greater stability in any conditions from the freshest powder to hard packed snow.  Longer snowboards also allow for greater control at a higher speed because there is ‘more’ board to absorb impact and vibration.  You should lean toward these types of boards if your looking to cruise all parts of the mountain.

If you’re more of a freestyle or park rider, then we’d definitely recommend picking up a snowboard that’s more on the short side for your weight or height class.  The shorter length will allow you to position and maneuver yourself more easily on jumps, rails, or in the pipe.  The shorter length also means that your board will weigh a bit less which will help you to really torque those spins and flips.

❄   ❅   ❄   ❅   ❄

So let’s say, for example, that I’m a 5’8″, 152 pound, snowboarder.  That means that I’m probably going to want to look for a snowboard somewhere between 149 cm and 157 cm.

If I’m a freeride snowboarder, then I’d probably want to look for a board closer to the 157 cm mark – probably around 155 cm.  If i’m a freestyle snowboarder, then i’d probably go for something closer to the 149 cm mark – probably around 150 cm.

❄   ❅   ❄   ❅   ❄

ONE MORE THING: Finally, you should consider the width of the snowboard.  I’ve left this point for last because it really only affects a small amount of riders out there.  Generally, the average snowboarder should be okay with any typical sized snowboard, but larger riders may need to invest in a wide width board.  If your shoe size is larger than a men’s size 11, then this is you!  You don’t want your toes dragging when you’re trying to cut an edge.

That just about sums it all up.  We know it’s no easy decision to find the perfect snowboard.  It’ll take a few trials before you know what fits your specific build and riding style.  You may want to go out and test some rentals before purchasing a snowboard.

We hope this guide helps when making your next purchase.

We’ll see you on the mountain!

Ω 

SKATEBOARD BUYING GUIDE: Trucks Recommended by Blackhole Boards

So you want to buy some trucks, huh?  But you can’t decide on a style or brand?  Well first things first, if you’re a newb then we suggest you start by reading an earlier blog post from our archives about choosing the right trucks before you go any further.  This post will help you pick skate trucks with the proper height and width for your particular riding style.  This is the most important step before you even start to consider a specific product.

Now that we have that out of the way let’s discuss what you should be looking for.  This is sort of a no-brainer, but you should really be looking for the lightest and most durable trucks that are within your budget.  You want the lightest trucks to help get the most pop, durable trucks to ensure that your axle doesn’t bend or break on your first big-air, or a happy combo of these two elements.

If lightweight is the direction that you’re looking to go in, then you’ll want to grab a set of trucks made from one of two metals – titanium or magnesium.  These are the lightest metals used in skateboard trucks and will help reduce the overall weight of your board giving you a lot more pop on your ollies.  Specifically, Theeve TiH Axleless titanium skateboard trucks (pictured below), Tensor magnesium skateboard trucks, or Thunder titanium trucks are among the lightest models currently on the market today.

197515 SKATEBOARD BUYING GUIDE: Trucks Recommended by Blackhole Boards
Theeve TiH Axleless titanium skateboard trucks

For those of you in need of durable trucks built to handle the impact of those hard grinds and huge stair drops we would recommend trucks cast from steel.  Though it is heavier than titanium or magnesium, steel is less willing to bend or break while riding and is often times more affordable than its lighter counterparts.  We’ve found that the most durable trucks out there tend to be from the Independent or Venture brand line-ups.

If you’re still having trouble deciding on a pair of trucks don’t be discouraged.  More often than not, the trucks you choose to ride are purely a matter of personal preference and finding what best suits your riding style will be your biggest obstacle. Differences in weight and durability, though they exist, are often times minuscule.

Blackhole Boards experts recommend skateboard trucks from Independent, Thunder, or Venture to riders of all experience levels. These brands have consistently produced some of the most reliable and long-lasting trucks of any brand throughout our years of riding experience.  You really can’t go wrong with any of these!

Browse Trucks by Brand Now:

61 box 40 SKATEBOARD BUYING GUIDE: Trucks Recommended by Blackhole Boards 76 box 40 SKATEBOARD BUYING GUIDE: Trucks Recommended by Blackhole Boards 106 box 40 SKATEBOARD BUYING GUIDE: Trucks Recommended by Blackhole Boards 118 box 40 SKATEBOARD BUYING GUIDE: Trucks Recommended by Blackhole Boards 126 box 40 SKATEBOARD BUYING GUIDE: Trucks Recommended by Blackhole Boards 183 box 40 SKATEBOARD BUYING GUIDE: Trucks Recommended by Blackhole Boards 347 box 40 SKATEBOARD BUYING GUIDE: Trucks Recommended by Blackhole Boards 210 box 40 SKATEBOARD BUYING GUIDE: Trucks Recommended by Blackhole Boards 215 box 40 SKATEBOARD BUYING GUIDE: Trucks Recommended by Blackhole Boards 228 box 40 SKATEBOARD BUYING GUIDE: Trucks Recommended by Blackhole Boards

We hope this bit of shopping advice helps in your next skateboard trucks purchase.  Good luck out there, ladies and gents.  Keep on thrashin’.

Ω

SKATEBOARD BUYING GUIDE: Choosing the Right Trucks

As a long-awaited follow-up to our April blog post – Which Skate Deck Is Right For Me? – here is our buying guide for choosing the right size skate trucks for your deck.

• • •

WHAT SIZE TRUCKS DO I NEED FOR MY SKATEBOARD?

The main thing that you want to consider when shopping for trucks is the width of your deck. Your truck’s axle width should closely match that of your deck’s width. Here’s a chart to help guide you:

Axle Width Deck Width
6″ – 7.25″ 6.5″ – 7.25″
7.5″ 7.25″ – 7.5″
7.75″ 7.5″ – 8″
8″ 8″ – 8.5″
8.5″ 8.5″ – 9″
9″ 9″ – 10″
10″ 10″ or more

 SKATEBOARD BUYING GUIDE: Choosing the Right Trucks

It’s VERY important to note that not all skateboard companies use the same method when labeling the size of their skate trucks. Some brands measure trucks by the width of the axle and some measure trucks by the width of the hanger. Some brands measure width in inches, some measure in millimeters, and some even create their own unique units of measure.

So DO YOUR RESEARCH before you make a purchase. There’s nothing worse than finding out that your trucks won’t fit your deck (or vice versa) after you’ve already bought them.

*But luckily for you we at Blackhole Boards provide the details for you on the product info section of our item pages to help save you a little time and effort (see picture below):

 SKATEBOARD BUYING GUIDE: Choosing the Right Trucks

• • •

WHAT HEIGHT TRUCKS DO I NEED FOR MY SKATEBOARD?

The height, or profile, of your trucks is the distance between the bottom of your deck and the hanger. Not quite as important as truck width, the profile and can vary from rider to rider and deck to deck.In general a mid-sized profile works for most skaters, but it can vary depending on your personal style. Check the chart below to find what’s right for you. Click on the profile type to browse those trucks:

Profile Style Wheel Size
Low Extra stability for flip tricks 50 – 53mm
Mid Good all-around for street or park 53 – 56mm
High Great for cruising/carving 56mm & up

At Blackhole Boards we label the profile height in the product name of each of our skateboard trucks to help you find what you’re looking for even faster (see picture below):

 SKATEBOARD BUYING GUIDE: Choosing the Right Trucks

• • •

We hope that this guide has been a help to you. Keep these tips in mind the next time you’re looking for a new pair of skateboard trucks.

Ω

*Stay tuned in the weeks ahead for a post on skateboard trucks recommended by the pros @ BlackholeBoards.com

SKATEBOARD BUYING GUIDE: Best Construction Types

As a follow-up to our previous post – Which Skate Deck Is Right For Me? - we thought we’d dive deeper into the topic of skateboard construction types.

Skateboard construction can really make all the difference when you’re out on the pavement. Beginners shouldn’t really worry too much about particular skateboard constructions since you’re just starting out, but the experienced and/or technical skater should definitely consider his or her options before buying a new skate deck.

By spending the few extra greenbacks on a high-end skateboard deck you can make some real improvements to your skating style and technique, many of which you’ll notice during your first session. You can shave a few ounces off your skateboard’s total weight allowing you to get those ollies a few more inches off the ground, or you can add strength to your deck giving you the confidence to pull off those insane, high risk tricks that would otherwise result in you splintering your board.

Get started by checking out our list of the top skateboard constructions. These are some of lightest and strongest skateboards available today:

Lightest Skateboard Construction Types: Strongest Skateboard Construction Types:
76 box 40 SKATEBOARD BUYING GUIDE: Best Construction Types Element Helium 278 box 40 SKATEBOARD BUYING GUIDE: Best Construction Types Almost Double Impact
76 box 40 SKATEBOARD BUYING GUIDE: Best Construction Types Element Featherlight 29 box 40 SKATEBOARD BUYING GUIDE: Best Construction Types Blind Eternal Life
76 box 40 SKATEBOARD BUYING GUIDE: Best Construction Types Element Push 93 box 60 SKATEBOARD BUYING GUIDE: Best Construction Types Foundation Fiberprime
401 box 40 SKATEBOARD BUYING GUIDE: Best Construction Types Plan B P2 55 box 40 SKATEBOARD BUYING GUIDE: Best Construction Types Darkstar Armor Ply
239 box 60 SKATEBOARD BUYING GUIDE: Best Construction Types Zero P2 21 box 40 SKATEBOARD BUYING GUIDE: Best Construction Types Baker Heli-pop

This list should help as you start shopping high-end decks. Our own pros know and love these decks, and they would recommend them to any skater. Through trial and error you might find another deck that better suits your style, but this is a great starting point.

You can check out our complete stock of premium skateboard constructions here.

Ω

*Stay tuned for future posts on buying tips for skateboard trucks.

SKATEBOARD BUYING GUIDE: Which Deck Is Right For Me?

From beginner to pro, every skateboarder has a different preference as to what decks they like to ride. So where should you start?

Keep four main points in mind as you’re choosing a deck: size, construction, brand, and cost.

• • •

WHAT SIZE SKATEBOARD DECK SHOULD I BUY?
The first thing to consider is the size of the deck. Skateboard decks are measured by their width and length. For most skateboarders width is typically more important then length for two reasons.

Generally wider decks are ridden by taller skaters because they offer more stability than a narrow deck would.
A wider board also offers more stability to experienced riders who skate transitions and ramps.

Most decks measure between 7 to 10 inches wide and 28 to 33 inches long. Beginners may want to go for a smaller sized width of 7 or 7.5 inches. But in the end, it’s really a matter of preference and what’s most comfortable for you.

WHAT TYPE OF DECK CONSTRUCTION IS RIGHT FOR ME?
You should think about what kind of skater you are before selecting a skateboard construction.

Beginner’s may want to start out with a regular skateboard deck, which is typically constructed of 6 to 7-plies of cross-laminated Canadian maple. A regular 6 or 7-ply deck is perfect for learning your first ollies, manuals, and kickflips. Plus, you should probably get some practice before droppin’ into the halfpipe.

More advanced riders may want to consider looking into high-end decks. High-end decks are built using Canadian maple plies just like regular decks, but they also incorporate other materials to increase strength and reduce weight. Fiberglass, bamboo, resin, Kevlar, carbon fiber, aluminum, and plastic are commonly used in a variety of high-end decks.

WHAT BRAND SKATEBOARD DECK SHOULD I BUY?
The skateboard brand that you purchase is 100% up to you and is mostly a matter of personal preference. Any brand of skateboard deck that you buy, if treated properly, will be around for plenty of tricks and flips.

However, it’s important to note that some brands may offer more or less concave and pop than other brands. You should try a few out and find what’s right for you (we’ll touch on concave and pop in a future blog post).

We would definitely recommend investing in a quality brand though, and you can bet that any and every board on BlackholeBoards.com is a quality skateboard deck. We wouldn’t sell you junk!

HOW MUCH SHOULD I SPEND ON A SKATEBOARD DECK?
Think about a few things when deciding how much to spend on a skateboard deck. Consider your skill level and how often you skateboard, and remember that the cost of skateboard decks varies depending on construction and brand.

Advanced skateboarders who put their decks through rigorous (and competent) use might want to invest in high-end decks which tend to run a little higher in price. But the added strength a high-end deck gives can really prolong the life of the deck, plus the lighter weight can help to improve your jumps, flips, and kicks.

If you’re a novice, just about any deck will do! Just get one, get out, and ride. You can find plenty of great skateboard decks for under $30.

• • •

Just remember that every skateboarder is different. In the end it’s about you and what you prefer in a skateboard deck.

We hope this buying guide helps you when you’re ready to make your next deck purchase.

Ω

*Stay tuned for future posts on buying tips for trucks and top deck constructions.

Signature Decks from Pro Skaters

Looking for a signature deck from your favorite vert or street skater? Look no further. Here’s a solid collection of the hottest signature skateboard decks from the best skaters in the world. You know these decks are good cuz they have their names on ‘em!

Click the skater’s name to see complete collections from each rider.

166642t Signature Decks from Pro Skaters
Mark Appleyard Decks
181369t Signature Decks from Pro Skaters
Bam Margera Decks
189967t Signature Decks from Pro Skaters
Zered Bassett Decks
193113t Signature Decks from Pro Skaters
Ali Boulala Decks
177351t Signature Decks from Pro Skaters
Diego Bucchieri Decks
181401t Signature Decks from Pro Skaters
Bob Burnquist Decks
189429t Signature Decks from Pro Skaters
Daewon Song Decks
189613t Signature Decks from Pro Skaters
Stevie Williams Decks
166603t Signature Decks from Pro Skaters
Erik Ellington Decks
162798t Signature Decks from Pro Skaters
Kerry Getz Decks
171473t Signature Decks from Pro Skaters
Rune Glifberg Decks
158736t Signature Decks from Pro Skaters
Josh Kalis Decks
189968t Signature Decks from Pro Skaters
Forrest Kirby Decks
195691t Signature Decks from Pro Skaters
Eric Koston Decks
193173t Signature Decks from Pro Skaters
PJ Ladd Decks
189702t Signature Decks from Pro Skaters
Rick McCrank Decks
181524t Signature Decks from Pro Skaters
Colin McKay Decks
189442t Signature Decks from Pro Skaters
Rodney Mullen Decks
193089t Signature Decks from Pro Skaters
Chad Muska Decks
166568t Signature Decks from Pro Skaters
Cale Nuske Decks
193118t Signature Decks from Pro Skaters
Tom Penny Decks
193003t Signature Decks from Pro Skaters
Andrew Reynolds Decks
181541t Signature Decks from Pro Skaters
Paul Rodriguez Decks
166656t Signature Decks from Pro Skaters
Geoff Rowley Decks
176879t Signature Decks from Pro Skaters
Arto Saari Decks
193207t Signature Decks from Pro Skaters
Ryan Sheckler Decks
171647t Signature Decks from Pro Skaters
Elissa Steamer Decks
185123t Signature Decks from Pro Skaters
Kristian Svitak Decks
162916t Signature Decks from Pro Skaters
Ed Templeton Decks
189957t Signature Decks from Pro Skaters
Jamie Thomas Decks
142418t Signature Decks from Pro Skaters
Mike Vallely Decks
193214t Signature Decks from Pro Skaters
Danny Way Decks

Element Board Construction Explained

If you’ve been trying to pick out a new Element deck but can’t figure out what in the world the different board constructions mean and why you should care, then look no further. I’m going to break down the different Element board constructions to help you pick the perfect deck for your needs.

push Element Board Construction Explained Element Push
  • Featherlight construction with added carbon fiber inlay
  • Use of epoxy for even more strength
  • Carbon fiber inlay absorbs shock for easier landing
  • You can see and feel the quality of construction

  • flatlight Element Board Construction Explained Element Flatlight
  • Premium 7 ply construction
  • Softer concave with lower nose and tail angles
  • More flat for quicker ollie and nollie response
  • Fewer died veneers to lighten environmental footprint

  • helium Element Board Construction Explained Element Helium
  • Equipped with five patented air frame chambers
  • Lighter weight because of wood displacement from air chambers
  • Element’s lightest full size deck
  • Stiff and responsive for more control

  • fiberlight Element Board Construction Explained Element Fiberlight
  • Element’s thinnest full size deck
  • Use of fiberglass inlay for greater strength
  • Inlay transfers energy throughout deck to avoid breaks
  • Better pop because preloaded with tension

  • featherlight Element Board Construction Explained Element Featherlight
  • Quality deck with premium construction
  • Follow professional and industry standards
  • Thinner veneers for lighter weight
  • Performance concave for better pop and ease of riding

  • triftwood Element Board Construction Explained Element Thriftwood
  • Traditional deck with seven plies of maple
  • Excellent value, great for any rider
  • Thicker than other Element decks
  • Stiffer than other Element decks

  • twig Element Board Construction Explained Element Twig
  • Thinnest Element deck
  • Lightest Element deck to date
  • Scaled to height
  • What Brand Name Skate Deck is Best for You?

    You know picking out a skateboard deck might be a pretty hard thing to do with so many choices out there today. If you’re looking to buy a quality brand name skateboard deck with awesome pop and won’t break the first time you set foot on it, then you can start by checking out the decks from any of the brands below. All are great choices and guaranteed for a sick ride.

    These are my top 20 brands (I thought a top 10 list was a little too cliche), but there are even more great decks out there. Don’t be afraid to experiment with a new deck or one that you’ve never tried before. After all it’s you who’s doing the work, not your deck. You never know…a new brand might suit your riding style better than the deck you’re used to.

    In no particular order here are my favorite skateboard deck brands. Click on the images or links below to see our complete list of in-stock decks for each brand:

    Element
    99522t What Brand Name Skate Deck is Best for You?
    Almost
    176891t What Brand Name Skate Deck is Best for You?
    Enjoi
    120883t What Brand Name Skate Deck is Best for You?
    Real
    160187t What Brand Name Skate Deck is Best for You?
    Alien Workshop
    179369t What Brand Name Skate Deck is Best for You?
    Baker
    176932t What Brand Name Skate Deck is Best for You?
    Blind
    166516t What Brand Name Skate Deck is Best for You?
    Darkstar
    177024t What Brand Name Skate Deck is Best for You?
    DGK
    177052t What Brand Name Skate Deck is Best for You?
    Flip
    177140t What Brand Name Skate Deck is Best for You?
    Girl
    171488t What Brand Name Skate Deck is Best for You?
    Think
    166886t What Brand Name Skate Deck is Best for You?
    Toy Machine
    1566t What Brand Name Skate Deck is Best for You?
    $lave
    173887t What Brand Name Skate Deck is Best for You?
    Black Label
    146109t What Brand Name Skate Deck is Best for You?
    Chocolate
    176985t What Brand Name Skate Deck is Best for You?
    Habitat
    166740t What Brand Name Skate Deck is Best for You?
    Zoo York
    170634t What Brand Name Skate Deck is Best for You?
    Creature
    171462t What Brand Name Skate Deck is Best for You?
    Zero
    157303t What Brand Name Skate Deck is Best for You?

    The Blackhole Boards Blog

    We decided to create a blog for the following reasons:

    1. so we can keep everyone up-to-date on the happenings at Blackhole
    2. we can have better communcation with our customers and fans
    3. so we can have a forum to bitch about stuff
    4. blogs make you cool

    Please visit our blog and post comments. We really are only doing this to try to improve our store and service.